Handling a Unexpected Hot Water System Failure: Essential Steps
Handling a Unexpected Hot Water System Failure: Essential Steps
Blog Article
Are you currently interested in information and facts on What Would Cause My Electric Water Heater to Stop Working??
Many contemporary homes use an electric hot water heater for their furnace, as a result of its comfort as well as convenience of use. Nonetheless, much like any other electric devices, problems might develop with its usage, unexpectedly. It can be actually frustrating to awaken to a cool shower instead of a hot one or having your bath with water that isn't hot sufficient and even as well warm. Whatever the instance may be, hot water heater troubles can be rather aggravating. Luckily, we've made a list of possible remedies to your hot water heater problems. There are a number of factors that can create most of these troubles, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the major power supply for security. Whatever the trouble is, getting it fixed should not position way too much of a concern if you follow these actions:
Call An Expert:
If after changing all malfunctioning components as well as resetting your temperature level, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for an expert point of view. The problem with your heating system could be that the hot and cold faucets have been switched over or it may be undersized for the quantity of hot water required in your house. Whatever the situation might be, a professional plumber would certainly assist solve the issue.
Examine Your Power Supply:
As basic as this might appear, it is extremely essential. Without sufficient power, your water heater will not work. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the issue, simply transform it on and off again. Replace any kind of damaged or damaged fuse. Check the appliance with power after these modifications to see if it's now working.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you might require to check the temperature level setups on your top thermostat. Ensure the breaker is turned off before doing anything. Open the gain access to panel as well as press the red button for temperature reset over the thermostat. This must aid heat up the water. Transform the breaker back on as well as inspect if the issue has been settled.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power issue, then try checking out your heating element if it is still working. Examine each of your heating elements to make sure the trouble isn't with any of them. If any one of them is faulty, replace that component and after that inspect whether the warm water is back on.
Verdict
Hot water heater troubles are not always significant. Many of them result from small concerns like a blown fuse or damaged heating element. Changing the malfunctioning parts need to work. However, if you are still incapable to resolve the trouble, give a call to your nearest plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you liked our piece about Hot Water Heater Repair. Thanks a lot for finding the time to read through our posting. If you please take a moment to share this blog entry if you enjoyed reading it. Thanks a lot for your time invested reading it.
High-quality, fast plumbing repairs. Report this page